Saba LVS14C44M21W Instructions D'utilisation page 73

If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
• During installation, the power supply must not be excessively
or dangerously bent or flattened.
• Do not tamper with controls.
• The appliance is to be connected to the water mains using new
hose sets and that old hose-sets should not be reused.
• The maximum number of place settings to be washed is 14.
• The maximum permissible inlet water pressure is 1 MPa.
GB
• The minimum permissible inlet water pressure is 0.04MPa.
• The vent openings must not be obstructed by carpet.
• Use only connection assemblies that comply with standard
EN 61770 and recommended for that country.
• For cleaning instructions, please read the paragraph at the end
of the manual.
Disposal
• Dispose of the dishwasher packaging material
correctly.
• All packaging materials can be recycled.
71