Saba LVS14C44M21W Instructions D'utilisation page 117

Unsatis-
factory
washing
result
GB
Unsatis-
factory
drying
result
115
Problem Possible Causes
Combination of soft
Cloudiness on
water and too much
glassware
detergent.
Black or gray Aluminum utensils
marks on have rubbed against
dishes dishes.
Detergent left
Dishes block
in dispenser
detergent cups.
cups
Improper loading
Too little rinse-aid
Dishes are removed
too soon
The dishes are
not drying
Wrong program has
been selected
Use of cutlery with a
low-quality coating
What to Do
Use less detergent if you have soft
water and select a shortest cycle to
wash the glassware and to get them
clean.
Use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in
the directions.
Increase the amount of rinse-aid/
refill the rinse-aid dispenser.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can escape.
Begin unloading the dishwasher
only once the dishes are barely warm
to the touch.
Empty the low basket first. This
prevents water form dropping off
dishes in the upper basket.
In short program the washing
temperature is lower. This also
lowers cleaning performance.
Choose a program with a long
washing time.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.