Grounding Instructions; Grounding; Extension Cords; Clea Ni Ng - Weston PRO-1100 Mode D'emploi

GROUNDING INSTRUCTIONS

GROUNDING

This appliance must be grounded while in use
to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor
cord and a 3-prong grounding type plug to fit
the proper grounding-type receptacle. The
appliance has a plug that looks like Figure
3. An adapter, Figure 4, should be used
for connecting Figure 3 plugs to two-prong
receptacles. The grounding tab which extends
from the adapter must be connected to a
permanent ground such as a properly grounded
outlet box as shown in Figure 5 using a metal
screw.

EXTENSION CORDS

Use only 3-wire extension cords which have
3-prong grounding-type plugs and a 3-pole
cord connector that accepts the plug from the
appliance.
an electrical rating not less than the rating of
the appliance. Do not use damaged extension
cords. Examine extension cord before using and
replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect.
Keep cord away from heat and sharp edges.
CLEANING INSTRUCTIONS
· NEVER IMMERSE the Vacuum Sealer in water or other liquid.
· Make sure the Vacuum Sealer has completely cooled before cleaning it.
· Wipe clean all outside surfaces including the Plastic Vacuum Chamber and
Vacuum Lid with a damp cloth or paper towel. Most household spray cleaners
are safe to use. Avoid spraying directly into the vent on the left side of the
unit. DO NOT use abrasive cleansers!
· Be careful while cleaning not to peel or damage the strip of Seal Bar Tape
covering the Seal Bar Heating Element.
· Dry all surfaces and close the Vacuum Lid before storing the Vacuum
Sealer.
WARNING!
appliance, make sure the appliance is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
8
Use only extension cords having
Before cleaning, assembling or disassembling the
Grounding
Prong
Circuit
Grounding
Conductor
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA2220
FIGURE 3
FIGURE 4
FIGURE 5