Operating Instructions; Cleaning Instrucations - Weston 65-0503-W Instructions D'utilisation

OPERATING INSTRUCTIONS

Vacuum Canisters may be used with a vacuum sealer (Sold Separately).
1. Attach the vacuum sealer (sold separately) to the power supply.
2. Press the ON/OFF button on the control panel to turn the vacuum sealer "ON".
The ON/OFF button on the display will illuminate.
3. Fill the Canister with the product to be marinated. Put the Lid on the Canister.
The seal area and the top of the Canister must be clean and dry to seal properly.
Vaccum Hose
4. Insert one end of the Vacuum
FIGURE 1
Hose into the accessory port
(FIGURE 1) on the vacuum sealer.
5. Insert the other end of the
accessory hose into the port
on the lid of the canister
(FIGURE 1).
Vacuum Sealer Sold
6. Turn the Knob on the
Accessory Canister
Separately
Canister to the Seal position.
7. Press the accessory button, this will engage
the vacuum pump. The appliance will stop automatically when the vacuum process
is complete.
8. Once the process is complete you will hear the vacuum pump release. Gently
remove the Vacuum Hose from both the Canister and the vacuum sealer.
9. To test vacuum, gently tug on the Canister Lid. The Canister Lid should not
move.
10. To release the vacuum and open the Canister Lid, turn the Knob on the
Canister to the Open position.
11. Press the ON/OFF button on the control panel to turn the vacuum sealer "OFF".
12. Disconnect the vacuum sealer from the power supply before leaving the work
area and when work is complete.
CLEANING INSTRUCTIONS
Top rack dishwasher safe.
Gently wash the Canisters and the Lids in warm soapy water. Rinse with clean
water, dry immediately.
Wash the Vacuum Hose if necessary in warm soapy water. Rinse with clean
water, Hang straight to thoroughly dry.
3