Bestway 58515 Manuel Du Propriétaire page 11

OPERATION
CONTROL VALVE OVERVIEW
WARNING: To prevent equipment damage
and possible injury, always switch off sand
filter before changing the Control Valve
function. Changing valve positions while
the pump is running can damage the
Control Valve, which may cause personal
injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle
and rotate to desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6
different filter functions: Filter, Closed, Backwash,
Rinse, Drain and Circulate.
Filter:
This function is used to filter
pool water and should be positioned
here 99% of the time. Water is pumped
through the sand filter, where it is
cleaned and returned to the pool.
A
C
C
B
Closed:
flowing between the sand filter and the
pool.
11
This function stops water
C
A
C
B