Cleaning, Maintenance And Repairs - Meister MSE800-1 Traduction Du Manuel D'utilisation Original

5454000-Saebelsaeg_man 03.12.14 08:23 Seite 54
CAUTION! This method should
only be used with short saw
blades and in soft materials, such as
soft wood or insulation materials.
Finishing work
• Switch the machine off.
• Unplug the machine from the power
supply.
• Allow the machine to cool down
sufficiently.
• Prior to cleaning, maintenance or
storage, remove the inserted tools.
11 – Cleaning, maintenance
and repairs
Cleaning
Caution! Switch the machine off,
pull the power plug from the
power supply and allow the machine
to cool down before carrying out any
inspection, maintenance or cleaning
work!
• Keep the machine and the ventilation
slots clean to ensure safe and correct
operation.
• Check regularly to make sure that
dust and foreign bodies are not
caught in the openings close to the
motor and around the On/Off switch.
Use a soft brush to remove collected
dust. Wear goggles when cleaning.
• Clean the machine housing with a
soft, damp cloth. You can use a mild
cleaning agent but make sure it is one
without alcohol, benzene or other
cleaner.
54
• Never use a solvent to clean plastic
parts.
• Lubricate all moving parts regularly.
Maintenance
• Check the machine and accessory
parts (e.g. tool inserts) before and
after each use for wear and damages.
If necessary, replace with new ones in
accordance with the descriptions in
these operating instructions. When
doing so, pay attention to the
technical requirements.
• Check all fixtures regularly. These
may become loose over time due to
the vibrations.
• If the power cable of this machine is
damaged, it may only be replaced by
the manufacturer, their customer
service department or a similarly
qualified person, in order to prevent
risks.
List of replacement parts
The following parts may be purchased
from the customer service department:
Saw shoe, adjustable (8)
Caution! After carrying out any
cleaning or maintenance work,
make sure that all protective
mechanisms, if present, are correctly
replaced and securely attached!
Never use the machine without
protective mechanisms!
Repairs
Inside the machine there are no parts
that can be repaired by the user.
Consult a qualified specialist to have the
machine checked and repaired.