Components; Proper Use Of The Product - Meister MSE800-1 Traduction Du Manuel D'utilisation Original

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
5454000-Saebelsaeg_man 03.12.14 08:23 Seite 49
Rapid saw blade
replacement
LED working light
Cable length
Suitable for use with wood
Suitable for use with metal
3 – Components
1
Gripping surface
2
Locking button for rotating handle
3
Adjusting wheel for stroke rate pre-
selection function
4
On/Off switch
5
Locking switch for continuous
operation
6
Handle
7
Lock
7a Saw blade holder
8
Saw shoe, adjustable
9
LED work light
10
Locking lever for saw shoe
adjustment (Figure 3)
11
Saw blades
4 – Proper use of the
product
Sawing in wood, metal and plastics.
Only use suitable tool inserts and
observe the relevant manufacturer
specifications. Any other type of use is
inappropriate. The machine is designed
for household, not commercial use. The
machine may not be used as a
permanent installation.
This machine may not be used by
people (including children) with
limited physical, sensory or mental
capacities, with a lack of experience
and/or without the appropriate
knowledge, unless they are
supervised by someone who is
responsible for their safety or have
been instructed by such a person
with how to operate the machine.
Children should be supervised to
ensure that they do not play with the
machine.
CAUTION! Improper use,
modifications to the machine
and the use of components that are
not tested and approved by the
manufacturer may result in
unforeseen damage!
Improper use of the product
All applications with the machine that
are not listed in the chapter "Proper
use" are considered improper use.
This power tool is not suitable for
cutting down trees.
Uses for which the power tool is not
designed may cause hazard and injury.
Do not use accessories that are not
intended specifically for this power tool.
Just because you are able to attach an
accessory to your power tool does not
guarantee it is safe to use.
The permitted stroke rate of the tool
insert must be at least as high as the
highest value specified on the power
tool. Accessories that turn faster than is
permitted may break and fly away.
There is a risk of injury. The user of the
machine is liable for all property and
49

Publicité

Table des Matières
loading

Table des Matières