Storage And Transportation; Disposal And Recycling; Troubleshooting And Assistance - Meister MSE800-1 Traduction Du Manuel D'utilisation Original

5454000-Saebelsaeg_man 03.12.14 08:23 Seite 55
12 – Storage and
transportation
Storage
• Clean the machine as described
above.
• Store the machine and its parts in a
dry place, free from frost.
• Always store the machine out of the
reach of children. The ideal storage
temperature is 10 to 30 °C.
• We recommend storing the machine
in its original packaging or covering
with a suitable cloth to protect it from
dust.
NOTE! Before using the machine
again, check the machine for any
signs of wear or damage according to
these operating instructions.
Transport
• Switch the machine off and unplug it
from the power supply before
transporting.
• Attach any transport protection
mechanisms, if available.
• Always carry the machine by the
intended handles/gripping surfaces.
• Protect the machine against damages
and strong vibrations that may occur,
in particular, when transporting in a
vehicle.
• Secure the machine to prevent it
slipping or tipping.
13 – Disposal and recycling
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in
accordance with the
2012/19/EU directive for
the disposal of electrical
and electronic waste, and
sent for proper and
environ mentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
14 – Troubleshooting and
assistance
The sabre saw has no power
– Check the plug connection.
Saw blade comes loose
– Saw blade was not fitted correctly.
Insert the saw blade as far as it will
go into the tensioning mechanism.
– Quick tensioning mechanism is not
returned to the starting position.
Insert the saw blade as far as it will
go into the tensioning mechanism and
manually press the lever into the
correct position.
Sabre saw is not sawing straight
– Too much pressure is being exerted
on the sabre saw.
– The setting of the sabre saw is wrong
for the material to be sawn. Check
the speed.
55