dirna Bergstrom bycool blue line FLAT ADR Instructions De Montage page 30

FLAT
EN
ES
Place the filler plug in the tank, cut to
20
100mm; insert "T" and connect the pipe
with the smaller diameter to this, mark
with white tape and check that the
curve radius is big enough to avoid
constriction.
To get read of union staples from water´s
21
protecting carcase to connect with the
2 ways-box in T to itself and to leave
everything like it was previously.
To connect wiring level pump.
To fix pump assembly to the tank with (2)
22
metal screws 5.4x19 mm. and to connect
the pump to the impulsion hose that comes
from the evaporative.
21
22
30
®
20