dirna Bergstrom bycool blue line FLAT ADR Instructions De Montage page 28

FLAT
EN
ES
Place tank support on the most suitable
16
lower part of the rear area of the cab. Mark
and drill Ø 9 on the cab bearing in mind the
vertical position of the support. Minimum
(6) fastening drill holes.
Place M6 rivet nuts and fix the support
17
with M6/100x30 screws.
(*) – Where it does not lean on the even
part, place a 10mm separator and screw
M6/100 x 40.
Rivet nut
28
Allen screw 6/100x30
Grower washer Ø 6
Flat washer Ø 6
Supports
Tank
6/100x30
Grower washer Ø 6
Flat washer Ø 8
Support
Rear part cab
6/100x40 (*)
10 mm separator (*)
Rear part cab (*)
®