1
Fundamentals
1.1
About these instructions
These instructions provide all the information and safety
precautions needed for the safe operation of the product.
1.2
Information on the model
Product
ID number
designation
SRP 5010
1110000-xx
1110001-xx
SRP 5080
1110319-xx
1110320-xx
ID label
The ID label is located above the encoder connections.
Example:
1
1
Product designation
2
ID number
3
Index
CE mark
The device receives a CE mark in accordance with the
EMC Directive 2014/30/EU.
The CE marking is
not
in accordance with EC Machinery
Directive 2006/42/EC. In the sense of the EC Machinery
Directive 2006/42/EC the device is partly completed
machinery.
Further information:
"Einbauerklärung", page 150
Validity of the documentation
Before using the documentation and the product, you
need to verify that the documentation matches the
product.
Compare the part number and the index indicated in
the documentation with the corresponding data given
on the ID label of the product
If the part numbers and indexes match, the
documentation is valid
If the part numbers and indexes do not match
so that the documentation is not valid, you will
find the current documentation for the product
at www.heidenhain.de.
HEIDENHAIN | Betriebsanleitung SRP 5000 | 5/2017
Index
-
-
-
-
2
3
1.3
Notes on reading the documentation
The table below lists the components of the
documentation in the order of priority for reading.
WARNING
Fatal accidents, personal injury or property
damage caused by non-compliance with the
documentation!
Failure to comply with the documentation may result in
fatal accidents, personal injury or property damage.
Read the documentation carefully from beginning to
end
Keep the documentation for future reference
Documentation
Description
Addendum
An addendum supplements or
supersedes the correspond-
ing contents of the Operating
Instructions and, if applicable,
of the Installation Instructions.
If this document is included in
delivery, read it first before you
proceed. All other contents of
the documentation retain their
validity.
Operating Instruc-
The Operating Instructions
tions
contain all the information and
safety precautions needed for
the proper operation of the
product according to its intend-
ed use. It is included in deliv-
ery and has the second highest
priority for reading.
Would you like any changes, or have you found any
errors?
We are continuously striving to improve our
documentation for you. Please help us by sending your
requests to the following e-mail address:
userdoc@heidenhain.de
1.4
Storage and distribution of the
documentation
These instructions must be kept in the immediate vicinity
of the workplace and must be available to all personnel
at all times. The operating company must inform the
personnel where these instructions are kept. If the
instructions have become illegible, the operating company
must obtain a new copy from the manufacturer.
If the product is handed over or sold to a third party, the
following documents must be given to the new owner:
Addendum, if supplied
Operating Instructions
23