HEIDENHAIN SRP 5000 Mode D'emploi page 35

9.3 Disturbance during operation with
controller
The above-mentioned disturbances can also occur during
operation of the rotary table with a controller.
Further information: "Troubleshooting", page 36.
You will also find the meaning of the faults, as well as
instructions for correcting them, in the instructions for the
respective controller.
HEIDENHAIN | Betriebsanleitung SRP 5000 | 5/2017
10 Removal, environmental
protection and disposal
WARNING
Opening the device presents a hazard from strong
magnetic fields!
Strong magnetic fields in the surroundings of the
device present a health hazard for persons with
magnetically influenceable implants (e.g. heart
pacemakers).
Persons with magnetically influenceable implants
must maintain a safety clearance of 1 meter from
the device.
CAUTION
Danger of contusion from strong magnetic fields
released by opening the device!
Body parts can be squeezed for pinched.
Do not place any magnetizable materials (e.g.,
watches, steel or iron tools) and/or permanent
magnets into the vicinity of the device
Wear protective gloves
Preparation
Switch off the machine and switch off the power
supply
Disconnect the motor connection cable from the
controller
Disconnect the encoder connector
37