Main Machine Components (Fig. 1); Machine Description (Fig. 1); Installation; Contents Of The Packaging - Femi 785XL Instructions Pour L'utilisation Et L'installation

1.10. MAIN MACHINE COMPONENTS (FIG. 1)

(1) Control handgrip
(2) Blade tensioning handwheel
(3) Transport handles (table model only)
(4) Blade sliding guide
(5) Machine body
(6) Blade
(7) Motor
(8) Control box
(9) Swivel support
(10) Bar holder (table saw model only)
(11) Clamp
(12) Clamp drive
(13) Base
(14) Transport handle (model with wheels only).
(15) Roll bar (model with wheels only)
(16) Support feet (model with wheels only).
(17) Quick slide clamp lever.
1.11.

MACHINE DESCRIPTION (FIG. 1)

The bandsaw is made up of two main parts: the machine body (5) complete with motor and
drive system (7) which is joined, by means of a swivel support (9), to the bottom section, made
up of a base (13) and clamp (11).

2. INSTALLATION

2.1.

CONTENTS OF THE PACKAGING

• 1 bandsaw
• 1 Bar holder (OPTIONAL)
• User Manual
• Supplementary sheet
2.2.

REMOVING THE PACKAGING

Remove the box used to protect the machine during transport.
It is advisable to keep the packaging for future use (for transporting or storing the machine).
2.3.

SAW HANDLING

a) Install the handles (3).
b) Lift the machine as illustrated in the fi gure (Fig. 2)
2.4. SAW HANDLING
a) Use the two wheels and the front handle when conditions allow (level surfaces).
b) Lift the machine as illustrated in the fi gure (Fig. 2).
Art. 785XL, SN205XL, NG160, ABS NG160
Art. 787XL
EN
Cont.
27