Publicité
Les langues disponibles
Les langues disponibles
2. Description Main parts
1.
Casing
2.
Handle
3.
Lid
4.
Mains connection pin
5.
Cable connector
6.
Connector input
7.
Appliance base
8.
Pilot light
3. Features
•
Electrical features: 220-240V, 50Hz, 400W
•
Capacity: 1 liter
4. Use
•
This appliance has only been designed for warming milk and liquids, and for preparing hot chocolate.
Do not use it for any other purpose.
•
Do not use the appliance to heat any other type of liquids other than milk, water, coffee, liquid or
chocolate.
•
Completely remove all the elements inside or outside the appliance that were used for packing and
transporting it.
1) Insert the cord connector (5) into the connector (6) on the base (7) of the milk warmer.
2) Raise the lid (3) and pour the liquids into the warmer. The quantity of milk must be between the MIN
and MAX marks.
3) Plug the pin (4) into the mains. The pilot light will come on.
Heating milk
•
Wait a few minutes until the milk has reached the required temperature.
•
We recommend keeping the lid closed while the appliance is operating, to prevent skin from
forming.
•
Once the maximum temperature (80ºC) has been reached, this temperature will remain constant but
without boiling.
Preparing self made hot chocolate
•
Break the chocolate up into pieces for better dissolution.
•
Add the pieces of chocolate to the milk.
•
Stir gently from time to time using a wooden spoon until an even mixture has formed. Do not use
abrasive products that could damage the coating.
•
Add more chocolate or milk to the mixture to obtain thicker or thinner chocolate, depending on your
preference.
Publicité
