Advice For Using Your Core-X3 Under Water; Installing The Sim Card - Crosscall CORE-X3 Mode D'emploi

ADVICE FOR USING YOUR CORE-X3 UNDER
WATER
To take photos, you should activate the touch-lock
which locks your touch screen (in photo mode, icon at the top
of your screen) You can then press a volume button to take
photos (or use the programmable button)
After immersion in seawater; you should rinse your mobile in
freshwater.
It may be that the slits of the speaker and microphone are
blocked with water. Wait a few minutes before making a call to
get back to optimal functionality.

INSTALLING THE SIM CARD

1.Check that your device is turned off
If not, turn the power off by pressing the On/Off button
2. Open the SIM tray using the SIM eject tool provided
a.Take the tool provided
b.Insert it into the hole, as shown below, to eject the SIM tray
from its housing.
3. Pull out the tray completely with the metal side facing
upwards
4. Insert the SIM cards
a. Insert the SIM card, face down, in the smallest
compartment
b. If you wish, insert a second SIM card (or an SD card up to
128GB max.), face down, in the biggest compartment
feature
2