Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use exclusively water and non-abrasive neutral detergent for cleaning.
Use exclusively water and non
damage the surface of the appliance and compromise the quality and healthiness of the product being
damage the surface of the appliance and compromise the quality and healthiness of the product being
damage the surface of the appliance and compromise the quality and healthiness of the product being
processed.
Do not use abrasive sponges.
When cleaning do not use cloths that leave lint.
When cleaning do not use cloths that leave lint.
Do not use water jets to clean the appliance.
Do not use water jets to clean the appliance.
1
8.2.3 – CLEANING THE OUTSIDE OF THE APPLIANCE
CLEANING THE OUTSIDE OF THE APPLIANCE
Carry out this operation whenever necessary.
Carry out this operation whenever necessary.
APPLIANCE STATUS:
-
ON/OFF button on OFF (
-
power supply plug disconnected from the mains.
power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
METHOD
Clean the outer surface of the appliance (steel base and panelling), using a non
Clean the outer surface of the appliance (steel base and panelling), using a non-abrasive sponge soaked in neutral
with a sponge soaked in water and dry with a clean cloth.
with a sponge soaked in water and dry with a clean cloth.
Use exclusively water and non
Use exclusively water and non-abrasive neutral detergent for cleaning.
damage the surface of the appliance and compromise the quality and
damage the surface of the appliance and compromise the quality and healthiness of the product being
processed.
Do not use abrasive sponges.
Do not use abrasive sponges.
When cleaning do not use cloths that leave lint.
When cleaning do not use cloths that leave lint.
8.2.4 – CLEANING THE CONDENSER
Carry out this operation every 30 days.
APPLIANCE STATUS:
-
ON/OFF button on OFF (
-
power supply plug disconnected from the mains.
power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
METHOD
To ensure that the appliance works properly and efficiently, the air condenser (ref. 1 fig. 9) must be kept clean so that the
To ensure that the appliance works properly and efficiently, the air condenser (ref. 1 fig. 9) must be kept clean so that the
To ensure that the appliance works properly and efficiently, the air condenser (ref. 1 fig. 9) must be kept clean so that the air can
circulate freely. This operation should be carried out every 30 days. Remove the control panel by loosening the screws (ref. 2 an
e freely. This operation should be carried out every 30 days. Remove the control panel by loosening the screws (ref. 2 an
e freely. This operation should be carried out every 30 days. Remove the control panel by loosening the screws (ref. 2 and 3
fig. 9). Clean with a non-metal brush to remove all the dust and fluff from the fins. It is advisable to use a vacuum clean
metal brush to remove all the dust and fluff from the fins. It is advisable to use a vacuum cleaner so that dust
metal brush to remove all the dust and fluff from the fins. It is advisable to use a vacuum clean
does not float in the air. If there are greasy deposits, eliminate with a brush soaked in alcohol.
does not float in the air. If there are greasy deposits, eliminate with a brush soaked in alcohol. DO NOT SCRAPE THE SURFACES
WITH POINTED OR ABRASIVE OBJECTS.
BCB_03-05-10-15 Rev.02
abrasive neutral detergent for cleaning.
abrasive sponges.
on the display);
on the display
abrasive neutral detergent for cleaning.
on the display);
on the display
The use of different products could
The use of different products could
abrasive sponge soaked in neutral detergent. Rinse
The use of different products could
The use of different products could
healthiness of the product being
DO NOT SCRAPE THE SURFACES
2
Fig. 8
pag. 66
Publicité
Table des Matières
