Understanding The Status Light - Unitron uMic Mode D'emploi

Completion of pairing:
Wait until both indicator lights turn solid blue.
This can take up to two minutes but typically is
done within a few seconds.
The uMic can be paired to a maximum of four
devices. A fifth pairing will replace the first paired
device.
Two devices need to be paired only once.
They remain paired after switching off and will
automatically connect after being turned on again.
10

Understanding the status light

Information during operation:
Switching on
Streaming
Streaming paused
Pairing mode
Information about power and battery:
Switching on
Switching off
Charging
Charged and full battery Solid green
Low battery warning
uMic sleep mode or off
Green 2 seconds
Solid blue
Short blue blink
Rapid blue blink
Green 2 seconds
Red 2 seconds
Solid red
Additional red short
blink as well as the
main light
Indicator is unlit
11