Replacing The Power Supply Cable - Brandt TE874XS1 Guide D'installation Et D'utilisation

INSTRUCTIONS FOR THE INSTALLER
MAINTENANCE

Replacing the power supply cable

If the power supply cable should be replaced,
it is necessary to use a cable with a section of
3x0.75mm type HO5VV-F or H05RR-F, complying

with the regulations in force.
The connection to the terminal board must be
effected as shown in fig.0:
brown cable L
blue cable N
green-yellow cable
 Rapid burner
 Semi-rapid burner
3 Auxiliary burner
4 Triple ring burner
8 Control knob for burner
(phase)
(neutral)
(ground)
MODEL
TE874XS1
3000 W
750 W
000 W
3800 W
Fig.0
8