Description Of Control Panel; Powering On /Stop; Adjusting The Power; Adjusting The Timer - Brandt TI614BS1 Guide D'installation Et D'utilisation

99638635_A_ML.qxp 17/04/2007
2 2 / USING YOUR APPLIANCE
EN
DESCRIPTION OF THE CONTROL
• •
PANEL
C
Start/stop touch control.
A
Power - + touch controls.
B
Power - + touch controls.
C
• • POWERING ON
Press the start/stop button for the cooking
zone you want to use. A flashing 0 and a bip
indicate that the cooking zone is on. You can
then choose the desired power level.
If you do not select a power level, the cooking
zone will automatically turn itself off.
STOP
• •
Press the start/stop button for the cooking
zone used or the power "
displayed.

ADJUSTING THE POWER

• •
Press the + power button, and a bip* will con-
firm that your settings from 1 to P (maximum
power) are actually taken into account.
When it is switched on you can move directly
to maximum power "P" by pressing the "
ton.
Tip
For simultaneous use, favour the use
of cooking zones located on opposite
sides of the hob.
On the same side, the use of a cooking
zone at maximum power results in an auto-
matic limitation of the other cooking zone
on that side, which is indicated in the power
level display.
11:05 Page 24
A B
- -
" button until 0 0 is
- -
" but-

ADJUSTING THE TIMER

• •
There is a timer for each cooking zone.
Use the button to select the cooking zone
on which you would like to use the timer.
If you press this button several times, a rotat-
ing symbol will show which cooking zone the
timer is being used for.
The timer may only be used for one cooking
zone at a time.
To use the timer:
- turn on the cooking zone
- select the rotating symbol for this cooking
zone.
The timer only operates if there is something
on the cooking zone.
- adjust the timing by pressing "
timer (or "- - " adjusting from 99,98,97,...min).
As soon as you release the button, the power
display will show the power of the cooking
" .
"
t
zone or a
When you have finished cooking, the cooking
zone turns itself off, the timer shows 0 0 and a
b b i i p p sounds. Press any button to stop the bip.
- To change the timer settings, press the - or +
buttons on the timer.
- To stop the timer, press the
- To use the timer on a different cooking zone,
choose a new use by pressing the
several times.
When the previous timing stops, set your tim-
ing for the new cooking zone using the "+" or
"-" buttons.
24
+
" on the
button.
button