Common Settings - Panasonic RR-US310 Mode D'emploi

Common settings

The following are common settings to both recording and playback.
Common settings operation
• When the unit is not in the stop state, press
[ STOP/RETURN].
1 Press [MENU/FOLDER].
Press u, i to select the setting
2
item ("BEEP", "
and press [q OK].
• The blinking item is currently selected.
Press +, – to change the setting and
3
press [q OK].
To exit the setting screen, press
[g STOP/RETURN].
BEEP
Set the beep sound for button operation.
: No beep sound.
: Beep sound.
FOLDER
(The factory setting is " ".)
● Even if the beep sound is set to " ", the
sound is not output during recording or while
recording is paused.
LED (Recording indicator)
Set whether to light the recording indicator
during recording.
(The factory setting is " ".)
●
" or " ")
PDF COPY
In the case the Operating Instructions (this
manual) stored in "MANUAL" folder in the
internal memory of this unit are deleted, they
can be recovered. Select "
left for recovery.
When formatting is performed on this unit
( ➜ page 13), "MANUAL" folder is also deleted.
To recover the Operating Instructions, perform
the above procedure.
●
: Unlit.
: Lit.
Even if "LED" is set to "
blinks during operations such as file deletion.
If there is not enough space (approx.
6 MB) or the battery level is low, recovery is
impossible.
", the indicator
" in step at
3
29
29