SOLAC ME7712 Mode D'emploi page 13

2. waRm Up
For effective treatment, we recommend first
pre-warming and draining the area to be treated,
especially if you have hard, painful cellulite. The
aim is to gradually knead the area so that warms
through, making the fat easier to separate from
the skin; this will also shift retained toxins, ac-
tivating local venous and lymphatic circulation.
To perform lymphatic drainage, use very gentle
shallow movements.
The main goal of lymphatic drainage is to sti-
mulate the lymphatic system to increase the
removal of liquids that sometimes accumulate
between the cells.
2 treatment:
ANTI-CELLULITE or BODY-MODELLING head,
in the case of painful cellulite
Once the warm up actions have been com-
pleted, we can begin performing the massage
treatment. Unlike draining, the reduction massa-
ge works with strong, fast, repetitive movements
on the skin, using the force of the kneading and
sliding movements.
In general, the anti-cellulite reduction massage
is recommended for modelling the curves of the
body, working on the "saddlebags", abdomen,
buttocks, etc.
3 Completion
Apply a moisturizing or treatment cream using
the BODY-CONTOUR head.
Once you have finished using the appliance:
Stop the appliance by releasing the pressure
·
on the on/off button.
Unplug the appliance to the mains.
·
Clean the appliance
·
ME7712_anticelulitico.indd 14
ClEaNING
Disconnect the appliance from the mains and
·
let it cool before undertaking any cleaning
task.
Clean the equipment using a damp cloth with
·
a few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
·
or base pH such as bleach, or abrasive pro-
ducts, for cleaning the appliance.
Do not submerge the appliance in water or
·
any other liquid, or place it under a running
tap.
aNomalIEs aND REpaIR
Take the appliance to an authorised technical
·
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
for EU product versions and/or in the case
that it is requested in your country:
EColoGy aND RECyClabIlIty
of tHE pRoDUCt
The materials of which the packaging of this
·
appliance consists are included in a collec-
tion, classification and recycling system.
Should you wish to dispose of them, use the
appropriate public containers for each type of
material.
The product does not contain concentrations
·
of substances that could be considered harm-
ful to the environment
This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of waste electrical and
electronic equipment (WEEE)
This appliance complies with Directive 2014/35/
EC on Low Voltage, Directive 2014/30/EC
on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products.
EN
21/03/16 11:44