Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembling the two part rail
1-2-3- Unfold the two parts of the rail.
4- Assemble the two parts of the rail using the
sleeve.
5- Mount the complete assembly using the eight
mounting screws.
- The mounting screws must not penetrate the
rail (do not drill).
- When installing the system directly onto
the ceiling, do not use the sleeve mounting
screws.
Fitting the rail onto the motor head
* Allows longer travel.
Fitting to the lintel bracket
Fitting the complete assembly onto
the garage ceiling
- Flush with the ceiling: mount the
system directly onto the ceiling using
the rail. It is possible to add mounting
points at the motor head level
- Hung from the ceiling: Intermediate
mounting points can be added to the
rail, especially in the case of a two part
rail or a rail that measures 3,500 mm.
* To add an adjustable intermediate
mounting along the rail, or a mounting
at a dimension H between 250 mm
and 550 mm, use the ceiling mounting
kit.
Fitting the arm onto the door and the
trolley
1- Release the trolley using the manual
release cord.
2- Bring the trolley up to the door.
3- Attach the arm to the door bracket
and the trolley.
4
1
21b1
4
1
H < 255
H
4
5
1
2
5
x 8
21b2
2
1
2
250 < H < 550
2
3
35 < D < 200
2
*
3
3
3
Publicité
Table des Matières
