Simu GM800 Notice D'installation page 14

Dimensions
Technical specifi cations
- Power supply
- Max. power consumption (standby / Operation)
- Radio frequency (Simu Hz)
- Number of channels that can be memorised
- Traction force (peak force)
- Starting force*
- Use
- Max. speed
- Programming interface
- Operating conditions
- Fins de course
- Built-in lighting
- Electrical insulation
Connections
- Safety input
- Pedestrian door safety input
- Wired control input
- Amber light output
- Accessory power supply output
- Remote aerial input
- Backup battery input
Operation
- Forced operation mode
- Independent lighting control
- Lighting time delay (after movement)
- Amber light pre-warning
- Safety input operation during closing
- Built-in obstacle detection
- Progressive start-up
- Opening speed
- Closing speed
- Closure approach speed
*Maximum load for motor to start and drive door for at least 5 cm (according to RAL-GZ defi nition).
2
171 min 140
63,6
Overall length : 3295 / 3895
Usable travel : 2555 / 3155
Fixation : 2982 / 3582
Rail : 2900 / 3500
Overall length : 3153 / 3753
Rail : 2900 / 3500
230V / 50Hz
4W / 120W
433,42MHz
32
800N
650N
20 cycles /day max.
0,14 m/s max.
4 buttons / 4 indicator lights
-20°C / +60°C - indoor dry - protection index IP20
Mechanical stopper at opening, electronic at closing, memorized end limit
position at closing.
24V / 21W, E13 socket
Class 2 (double insulation)
Dry contact NF / compatible with photoelectric TX/RX cells
Dry contact NF
Dry contact NO
24V / 15W with built-in fl ashing control
24V / 500 mA max.
Yes
Yes
By pressing and holding the motor control button
Yes for built-in lighting
Fixed, 60 seconds
2 seconds, automatic if light connected
Fully reopens
4 levels adjustable sensitivity
Yes
0,14 m/s max.
0,12 m/s max.
Programmable: Does not slow down, short slowdown zone (30 cm),
long slowdown zone (50 cm).
313,6
254,1
404,2
112,2
224,4