Elite arion mag Notice D'utilisation page 15

4) The coupled bearings on the roller do not require
lubrication and are practically maintenance-free.
5) Periodically check the roller clamping screws,
make sure that they are still tight but not so tight as to
damage the plastic frame.
6) In case of wear or breakage of the drive belt,
replace it by proceeding as follows:
Remove the rectangular covers ( ) from both front
longitudinal members (with aid of a screwdriver if
necessary), and the screws and washers from the
front roller on both sides, using the Allen key I)
supplied.
Undo the fixing screw (Fig. 13).
E
A
Undo the fixing screw located on the longitudinal
member on the side opposite the magnetic resistance
of the middle roller ) (Fig.14).
F
Replace the belt, refit the rollers in their correct
seats and secure all the screws again.
E) Position the rectangular cover on its seat.
7) Drive belts and other spare parts for the ARION
MAG are available from you local Elite dealer.
I
13
A
I
14
Read and follow the enclosed instructions.
Keep people, children and animals away from the
roller during use, since the moving and rotating parts
of the roller and the bicycle can cause damage in
case of contact.
Before starting training, position the trainer in a dry
place, away from potentially hazardous objects
(furniture, tables, chairs, etc.) in order to avoid any risk
of inadvertent or accidental contact with them.
Make sure any unevenness in the floor or objects
present on it cannot come into contact with the
rotating components of the incorporated mechanical
resistance.
Fax 0039 049 5940064
e-mail: contatto@elite-it.com
EN
15