Sleep Operation - Pioneer X-HM10-K Mode D'emploi

Micro chaîne cd
Masquer les pouces Voir aussi pour X-HM10-K:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Timer and sleep operation (Remote
control only) (continued)
n Sleep operation
The radio, compact disc, iPod, USB and Line In can all be
turned off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the Numeric button to set the
time (1 minute - 99 minutes)
4
"SLEEP" will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1
Whilst "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the STANDBY/ON button whilst "SLEEP" is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
1
Whilst "SLEEP" is indicated, press the SLEEP button.
2
Within 5 seconds, press the "0" button twice until
"SLEEP 00" appears.
n To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 22).
Timer playback
Sleep timer
setting
setting
1-99 minutes
Sleep operation will
automatically stop
Headphones
l Do not turn the volume on to full at switch on and listen
l Before plugging in or unplugging the headphone,
l Be sure your headphone has a 3.5 mm diameter plug
l Plugging in the headphone disconnects the speakers
l X-HM20 only: Audio from the iPod/iPhone cannot be
End
time
Desired time
Timer playback
start time
En-23
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
reduce the volume.
and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
automatically. Adjust the volume using the VOLUME
control.
heard via the headphones connected to the unit. "HP
INVALID" will be displayed if you connect the
headphones when the iPod/iPhone function is
selected.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

X-hm10-sX-hm20-kX-hm20-s

Table des Matières