Dimensions - AERMEC FCLMC20 Mode D'emploi

FCLMC20 perimeter case

DIMENSIONS

2
AFCLMC20UJ_ 6204350_01
WARNING: The use of this accessory is dedicated to CASSETTE FCL
and FCLI module 840 models.
ATTENTION: FCLI module 840, FCLMC20 requires the combination
with the mandatory accessory FCLMC20IK (Kit for Inverter Control-
ler).
ATTENTION: FCLI module 840, install the accessory FCLMC20IK (Kit
for Inverter Controller) before installing the accessory FCLMC20
(mantle boundary).
GENERAL DESCRIPTION.
The FCLMC20 accessory is a perimeter case in galvanised and
painted sheet steel, which is used when the fan coil is installed
outside the suspended ceiling. It is used for aesthetics and protec-
tion, therefore the technical features of the FCL and FCLI remain
unvaried.
FCLMC20 is set-up for 2-pipe systems.
It is also compatible with 4-pipe systems. In this case, just remove
the back panel positioned in front of the heating only circuit.
LIT COMPONENTS KIT:
34 self-threading screws
2 Semi-cases
4 installation brackets (2 brackets "L" and 2 brackets "Z")
4 reinforcement brackets
COLOUR CODE:
RAL 9010 (POLYURETHANE POWDER)
CASSETTE WITH FCLMC10 UNIT PROTECTION RATING:
IP20