Orbis VIARIS COMBI Mode D'emploi page 51

Description
VIARIS COMBI smart chargers have a set of embedded elements that are
required to connect the electric vehicle (EV) to the electrical supply in order to
recharge. It has a robust casing as well as electrical protection devices, which
can be included in the VIARIS COMBI as an option, to perform the recharging
process with added safety.
The operating status of the charger is always visible through its indicator lights.
It has a series of optional accessories that complement the functionality of the
equipment.
VIARIS COMBI smart chargers are designed for indoor and wall mounted
installations.
Depending on the model, they can recharge up to two electric vehicles
simultaneously, either by means of an outlet, or through a connection hose with
Type 1 or 2 connector, and with charging modes 1, 2 or 3 (the charging modes
are specified in EN 61851-1).
VIARIS COMBI smart chargers can have one or two outlets. The outlets can be
with 5 m connection hose (Types 1 or 2) and/or with an outlet (Schuko or Type 2).
The types of outlets and connection hoses can be found in the Technical
Features section.
Warning symbols used in this instruction manual
ELECTRICAL HAZARD.
cause bodily injury or death if instructions are not followed
GENERAL ATTENTION
There is a risk of electrocution that can
3