Gree GMV-ND100L/A-T Manuel D'utilisateur page 15

Multi VRF Floor Standing Indoor Unit
(1) Up and down swing function settings
Press "Function" button under power-on status to switch to up and down swing function, when
" " icon flickers, press "▲"or"▼" button to start up or cancel the up and down swing function. If
" " is on it means the function has been started up; if "
been canceled.
(2) Left and right swing function settings
Press "Function" button under power-on status to switch to left and right swing function, when
" " flickers, press "▲"or"▼" button to start up or cancel the left and right swing function. If "
icon is on it means the function has been started up; if "
been canceled.
(3) Settings of X-fan
X-fan function: after closing down the unit under cooling and dry mode, the air conditioner will
automatically dry the water of evaporator of indoor unit to prevent breeding of bacteria and mildew.
Turn on or cancel X-fan function: with the unit is started up, under cooling or dry mode, press
"Function" button to switch to X-fan function, when "
cancel X-fan function. If "
icon is off it means the X-fan function has been canceled.
(4) Settings of Timer Function
① Timer Function: under power-on status, the count down of power-off time can be set.
Under power-off status, the count down of power-on time can be set.
② Timer setting: press "function" button to switch to timer function, when "
press "▲"or"▼" button to adjust the setting time. After setting the time, press "ON/OFF"
button or without pressing any buttons for consecutive 5 seconds, the setting time is
confirmed and quit the function setting status. After quiting the function setting status, the
" " icon is on, it means the timer function has been turned on.
③ Cancel timer: press "Function" button to switch to timer function, when "
press "▲"or"▼" button to set the time to be "00", then the timer function is canceled; press
"ON/OFF" button or without pressing any buttons for consecutive 5 seconds, it will quit the
function setting status. After quiting the function setting status, the "
means the timer function has been canceled.
④ Count down setting range: 00~24 hours, in which "00" refers to closedown of timer function.
Each time press "▲" or "▼" button, if it is within 10 hours, it will increase or decrease 0.5
hour each time, if long press "▲" or "▼" button, it will increase or decrease 0.5 hour every
0.3 second; if it is over 10 hours, each time press "▲" or "▼" button will increase or
decrease 1 hour each time, and if long press "▲" or "▼" button, it will increase or
decrease 1 hour every 0.3 second.
(5) Setting of air renewal function
① Air renewal function: through adjusting the fresh air volume to improve the air quality and
keep the indoor fresh air.
② Air renewal setting: press "Function" button to switch to air renewal function, when "
icon flickers, press "▲"or"▼" button to adjust the air renewal level; after setting air renewal
level, press "ON/OFF" button or without pressing any buttons for consecutive 5 seconds,
the air renewal function has been confirmed to be turned on and then quit the function
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
" icon is on it means the X-fan function has been started up, if "
12
" icon is off it means the function has
" icon is off it means the function has
" flickers, press "▲"or"▼" buttons to start or
"
"
" icon flichers,
" icon flickers,
" icon is off, it
"