Electrical Information; Hard Wiring Connection; Receptable Wiring Diagram - Napoleon Vittoria GD19N-2 Manuel D'installation Et D'opération

Pour usage intérieur seulement. certifié selon les normes nationales canadiennes et américanes: csa 2.22 et ansi z21.50 pour les appareils à gaz décoratif à évacuation
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.0 electrical information

EN
WARNING
!
Do not use this appliance if any part has been under water. Call a qualifi ed service technician immediately to
have the appliance inspected for damage to the electrical circuit.
Risk of electrical shock or explosion. Do not wire 110V to the valve or to the appliance wall switch. Incorrect
wiring will damage controls.
All wiring should be done by a qualifi ed electrician and shall be in compliance with local codes. In the
absence of local codes, use the current CSA22.1 Canadian Electric Code in Canada or the current National
Electric Code ANSI/NFPA NO. 70 in the United States.
Always light the pilot whether for the fi rst time or if the gas supply has run out, with the glass door opened or
removed.
5.1

hard wiring connection

It is necessary to hardwire this appliance. Permanently framing the appliance with an enclosure requires the appli-
ance junction box to be hardwired.
This appliance must be electrically connected and grounded in accordance with local codes. In the absence of
local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70-1996 National
Electrical Code in the United States.
5.2

receptable wiring diagram

32
W415-2355 / A / 12.09.20
WIRE NUTS
SWITCH HOUSING
(C/W 2 RECEPTACLES)
43.1
CABLE
L1
CONNECTOR
L2
ELECTRICAL
BOX COVER
(C/W GROUND SCREW)

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Vittoria gd19p-2

Table des Matières