Cleaning The Interior Parts; Important Notes; Water Tank; Water Base - Boneco H680 Mode D'emploi

58
CLE ANING THE INTERIOR PARTS
en

IMPORTANT NOTES

Use a cleaning brush and a damp cloth for cleaning. Al-
ways add a small amount of dishwashing detergent to
the hot water.
Always unplug the BONECO H680 from the power
outlet before you start cleaning or doing mainte-
nance! Failure to do so can result in electric shock
and fatal injury!
Mold inside your BONECO H680 can add impurities
to the air and may adversely affect your health. Be
sure to remove any you find for this reason.
Do not use alcohol or corrosive cleaning agents for
cleaning.
Do not clean the BONECO H680 in a dishwasher.
High temperatures can deform the parts and make
them unusable. This damage is not covered by the
warranty.

WATER TANK

1. Fill the water tank halfway with hot water and add a
small amount of dishwashing detergent.
2. Thoroughly clean the inside of the water tank by hand
or with a suitable cleaning brush.
3. Also clean the cover.

WATER BASE

1. Pull the water base out of the BONECO H680.
2. Remove the drum with the evaporator mat.
3. Take the Ionic Silver Stick out of the water base.
®
4. Clean the water base and all of the parts inside. These
can be removed for cleaning.