Time Settings; Temperature Settings - BaByliss PRO MiraCurl BAB2665E Mode D'emploi

• Curl direction control for either a
uniform or natural finish (Right/
Left/Auto)
• Suitable for shorter and longer
hair lengths
• On/off switch with on indicator
light
• Heat ready indicator
• Sleep mode (after 20mn)
• Auto shut off (after 60mn)
• Salon length swivel cord (2.7m)
OPERATING INSTRUCTIONS
MiraCurl™ the Perfect Curling
Machine will create many different
curl effects in the hair. It is easy
to experiment with the different
settings to achieve the desired
results.
Always ensure that the sections of
hair you want to curl are no bigger
than 3cm wide. The type of curl
will depend on the temperature
selected, and the timer setting
which dictates the amount of
time the hair is kept inside the curl
chamber.

TEMPERATURE SETTINGS

There are 3 temperature settings
to select from; 190°C, 210°C and
230°C. We recommend you always
start with the lowest temperature
setting and increase the level of
heat as required.
• Setting I (190°C) - for delicate, fine
or coloured hair
• Setting II (210°C) - for normal tex-
tured hair
• Setting III (230°C) - for thick or
wavy hair

TIME SETTINGS

There are 3 timer settings with au-
dio beep indicator. These different
settings will give different curl ef-
fects. The longer the time the hair
is held inside the curl chamber, the
more defined the curl will be. But
results will also vary according to
hair type. Use the following as a
guide.
• Setting 8 (8 seconds = 3 beeps) -
for loose waves
• Setting 10 (10 seconds = 4 beeps)
- for soft curls
• Setting 12 (12 seconds = 5 beeps)
- for more defined curls
Audio off Setting
The automatic-beep indicator can
be turned off if not required by sli-
ding the timer switch to "0".
NOTE: When the '0' setting is
selected there will be no beep
indicator to advise when to re-
lease the styler. Take extra care
when using this setting.
11