Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Declaration of Conformity
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standard-
ization documents:
DIN EN 1037, EN ISO 12100, DIN EN 60204-1,
DIN EN 60745-1, DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the:
2006/42/EG, 2004/108/EG, 2006/95/EG.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering
of the technical documentation.
01.04.2017
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply....................................230 V AC (110 V)
Power consumption...........2.200W, 10A (2.000 W, 19,2A)
..............................................................with current limitor
Power output ..................................................1500 W
Number of strokes...................................6.600 stroke/min
Torque.......................................................................14Nm
Weight total......................................................15 kg
Blade's width....................................................5,8 kg
Includes:
1 PRIMO-STRIPPER
1 Blade 210 x 60 x 1 mm
1 Sprung clamp
1 Knife protection
1 Tool set
1 Ear protection
1 Protective gloves
1 Operating manual
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 |
14
i.v.
2.0 Safety Warnings
2.1 General Power Tool Safety Warnings
Warning
Failure to follow the warnings and instructions may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmosphe
res, such as in the presence of fl ammable liquids,
gases or dust.
Power tools create sparks which may ignite the
Dust o r fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
www.wolff -tools.de
Read all safety warnings and all
instructions.
Publicité
Table des Matières
