Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating manual
GreenCut
Read before use and keep safe
Comes with.
GreenCut
10 Trapezoidal blades
10 Hooked blades
3 Filling strips
Operating manual
(2)
(3)
(1)
(7)
(8)
Left-hander
GreenCut #063998 06/2011
1.0 Description of the device
1.1 Device description
1.2 Important parts
(6)
(5) (4)
2.0 Setting up the GreenCut
(9)
2.1 Inserting and replacing the blades
B
A
Right-hander
The GreenCut was designed for the following tasks:
Trimming of factory edges on linoleum, vinyl and needle
fleece
Cutting strips
Seam cuts to size in adhesive bed
It is suitable for linoleum, vinyl and needle fleece flooring
(1)
GreenCut
(2)
Blade holder
(3)
Spacer plate
(4)
Mounting bracket
(5)
Guide bracket 2 or 4 mm
(6)
Hooked blade
(7)
Trapezoidal blade
(8)
Clamping plate
(9)
Spacer (width: 5 mm, 10 mm, 15 mm)
The GreenCut is delivered with blades installed and is
ready for immediate use.
The material is first scored with the trapezoidal blade
and then cut through with the hooked blade.
The GreenCut is suitable for left and right handed
operation. The blades can be inserted accordingly.
Unscrew screws (A)
Remove clamping plate (B)
Insert blades
Reassemble in reverse order.
English
#63998
4
Publicité
Table des Matières
