Technical Specifications; Agrilaser ® Autonomic - Agrilaser Autonomic Mode D'emploi

Bird Control Group is not liable for the misuse of the Agrilaser Autonomic
and its accessories. Since Bird Control Group has no control over the
use of the product once in the hands of the customer, Bird Control
Group carries no liability for the use of the Agrilaser Autonomic. Under
no circumstances Bird Control Group, its partners, its suppliers or its
employees are liable for any loss, damage or expenses of any kind
resulting from the use, abuse, the inability to operate the product in a
correct manner and the effectiveness of the use.

1. Technical specifications

Agrilaser Autonomic
®
Laser
class
wavelength
output power
divergence
diameter at aperture
lifetime
NOHD
MPE
Computer operating system
Horizontal projection range
Vertical projection range
Power source
Operating voltage
Power consumption
Weight
Dimensions
Endurance
Operating temperature
9
3B
532 nm (green) continuous wave
<250 mW
0.05 mrad
Ø 40 - 50 mm
5,000 hours (during normal operating conditions)
<1540 m
25.4 W/m (assumed exposure duration of 0.25 seconds)
2
Windows 7 or higher
0° to +355°
-70° to +20°
Power adapter (100 - 277 VAC)
12 - 15 VDC
60 W (peak operating power)
• Agrilaser Autonomic: 10 kg (22 lb)
• Supporting frame (optional): 17 kg (37 lb)
• Solar accessory (optional):
solar panel: 7 kg (15 lb)
battery box: 35 kg (77 lb)
• Agrilaser Autonomic: 41 (16) x 41 (16) x 56 (22) cm (in) (L x W x H)
• Supporting frame (optional): 66 (26) x 66 (26) x 64 (25) cm (in) (L x W x H)
• Solar accessory (optional):
solar panel: 67 (26) x 46 (18) x 101 (40) cm (in) (L x W x H)
battery box: 46 (18) x 29 (11) x 33 (13) cm (in) (L x W x H)
IP65
-10 °C to +50 °C (14 °F to 122 °F)
WARNING: Carefully read all safety warnings and all instructions. Keep
all safety warnings and all instructions for future reference.
CAUTION: Prior to commissioning of the product, check if additional
laws and regulations are applicable in your country for use of the Agrilaser
Autonomic.
WARNING: Prior to use, perform a risk assessment of the intended
location and take precautions or control measures if necessary.