Key To Symbols; Symbols On The Machine And/Or In The Manual - Husqvarna 122C Mode D'emploi

Symbols on the machine and/or in
the manual:
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and
understand the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Wear a protective helmet where there
is a risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance
with applicable EC directives.
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 meters.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
2 – English

KEY TO SYMBOLS

Only use non-metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmer cord.
Noise emission to the
environment according to the
European Community's Directive.
The machine's emission is specified
in the Technical data chapter and on
the label.
Primer bulb
Set the choke control in the choke
position.
10000
Other symbols/decals on the
machine refer to special certification
requirements for certain markets.
The engine is switched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.