Assembling And Dismantling The Two-Piece Shaft - Husqvarna 122C Mode D'emploi

Assembling and dismantling the
two-piece shaft (122LK)
Assembly:
• Loosen the coupling by turning the knob counter-
clockwise.
• Align the tab of the attachment (A) with the arrow on
the coupling (B).
B
• Push the attachment into the coupling until the
attachment snaps into place.
Before using the unit, tighten the knob securely.
Dismantling:
• Loosen the coupling by turning the knob (at least 3
times).
ASSEMBLY
A
• Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
C
–
English 11