BOREAL RADIOFRÉQUENCE Série Instructions D'installation, D'utilisation Et D'entretien page 42

Submenu 02.02. Daily Programme
To choose the daily program we need to go to the following screen (see drawing D64):
By pressing just once button nº 7 we are able to access to the daily programming submenu. By
M-3-2 default, it will show the following screen.
We need to change the option "OFF" with "ON" by pressing the buttons nº1 and nº2 so as to
PROGRAMME
confirm to the machine.
DAY
Now we need to choose the hours that we would like the stove to be switched ON. To do this,
there are 2 hours available to start and 2 to stop the stove: START 1 and STOP 1; START 2 and
STOP 2.
MENU
For example:
Start at 09:00 hours / stop at 14:30 hours.
Start at 20:30 hours / stop at 23:00 hours.
off
From the previous screen, we press button nº 7 and it will show up:
M-3-2-02
START 1
DAY
MENU
By pressing nº1 and nº2 buttons we modify the value "OFF" and we set the time of the first start:
In this same way we can proceed to set the first time to stop:
off
M-3-2-03
STOP 1
DAY
MENU
In case that you want to set up just one time to start and stop, the options START 2 and STOP 2 should be "OFF".
If you want to set another on and off schedule, introduce the values of the second schedule in the same way that is explained previously. This way we
will have set the diary schedule with two starts hours and two stops hours.
It is also possible to schedule one automatic start hour and manual stop hour (or vice versa).
Example: START 1: 08:00 hours and STOP 1: "off"
START 1: "off" and STOP 1: 22:00 hours.
Sub-menu 03-03- Weekly programme
NOTE: Please, make the set up carefully in order to avoid hour' superposition and/or inactivate
the same day in different programmes.
If we intend to make a weekly set up we need to take into account that, in this occasion, we have 4 different hours to start
and stop. So we need to assign every day of the week the activation or not, as appropriate.
In order to activate them we need to start from the following screen:
By pressing just once button nº 7 we gain access to the weekly programming submenu. By default, it will show the following
screen.
off
M-3-3-01
PROGRAMME
WEEKLY
MENU
14:30
M-3-2-03
STOP 1
DAY
MENU
or
EN
OFF
M-3-2-01
PROGRAMME
DAILY
MENU
09:00
M-3-2-02
START 1
DAY
MENU
M-3-3
PROGRAMME
WEEKLY
MENU
41