Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9. OPERATION OF THE REMOTE CONTROL / DISPLAY
9.1
GENERAL INFORMATION OF THE REMOTE CONTROL / DISPLAY
The remote control shows information about the stove or insert performance. Once you access to the menu, you will see different screens and
configurations depending on the level.
Depending on the working mode, the display may has different meanings depending on the position in the screen.
Image shows an example of when the stove is off.
CLOC
AMBIENT
TEMPERATURE
Image shows the layout of the messages during the programming or configuration of the
working parameters. Particularly:
1.
The screen area saying "VALUE" shows the value that we introduce.
2.
The screen area saying "MENU LEVEL" shows the current menu level.
The remote control has an internal light with a timer that allows it to turn off automatically. To set the time of the timer, please
press at the same time buttons 1 and 7 and adjust the time from 0 to 9 seconds.
9.2
FUNCTIONS OF THE DISPLAY'S BUTTONS
The use of the display placed on the stove or insert is only recommended only recomended in case that there is not possibility of using of the
remote control, because it has no battery, it is far away, etc.
The symbol placed under the power button shows us, by a flashing light, if the remote control is working.
The symbol placed over the button number 2 shows us, by a light system, if the stove has any kind of problem.
The opening between buttons 1 and 2 serves to connect, if necessary, the remote control directly to the stove.
Button
Description
1
Decrease
2
Increase
ON/OFF
3
Unblocking
08:53
23ºC P-2
OFF
POWER
DIALOGUE
MENU
Performance description
Only decrease the value of the power.
Only increase the value of the power.
It switches on or off the stove pressing 2 seconds.
Unblocks the stove and switches it off.
OFF
VALUE
M-3-3-01
WEEK
MENU LEVEL
PROGRAMME
MENU
EN
DIALOGUE
RITT - LUCE
OFF
MENU
37
Publicité
Chapitres
Table des Matières
