CareFusion Alaris DS Mode D'emploi page 10

1. Fix the mounting kits to the vertical extrusion of the Docking Station.
2. Fit the top and bottom mounting bracket of the Docking Station to the trolley,
adjust spacing to suit trolley, and tighten to ensure the Docking Station is
secure.
Do not mount the Docking Station onto the trolley so that
A
the top of the Docking Station is higher than 160 cm above
ground.
The trolley has been designed to hold a Docking Station
loaded with a maximum of 9 pumps (6 syringe pumps and 3
volumetric pumps - see 'Specifications' section).
When loading or fitting additional pumps/devices to the
trolley always ensure that the assembly is correctly stabilised
and balanced.
When moving a trolley between locations, mounted with a Docking Station, it is important that the instructions below are followed.
Remove all unnecessary fittings and handle the Docking Station with care during transportation.
A maximum of 2 kg of fluid bags can be fitted to the supports on the Docking Station during transport.
Ensure that the adjustable pole is in the lowest position possible.
Ensure that the assembly is correctly stabilised and balanced before transportation.
A
8.5 kg max mass
per single pole
w
Getting Started (continued)
Fitting the Docking Station to the Trolley
Transporting the Docking Station when fitted to a trolley
Transporting the Docking Station on trolley with optional poles fitted
4.25 kg max
mass to
each pole
Ensure that side
poles are dropped
to lowest position
1000DF00444 Iss. 2
When moving a trolley between locations, mounted with the
Docking Station and with the optional poles fitted, it is important
that the instructions below are followed.
Do not mount more than 2 kg of fluid bags to hooks.
Ensure that the adjustable pole (s) is in the lowest position
possible.
Remove all unnecessary fittings and handle the Docking
Station with care during transportation.
Do not mount a mass greater than 8.5 kg on an individual
side pole or 4.25 kg to both poles.
Do not mount pumps higher than 160 cm above ground to
the poles facing in a forward position.
Ensure that the assembly is correctly stabilised
A
and balanced before transportation.
9/210
2 kg - max
weight of
fluid bags
when moving
trolley
160cm - max
height of DS to
ground
w