Bluetooth® Wireless Communication; Pairing A Bluetooth® Device - 3M PELTOR WS LiteCom Pro III Mode D'emploi

SMART TIP: When browsing long lists such as channel and
sub channel, press and hold either the [+] or [–] button to skip
ten items at the time.
SMART TIP: The headset will automatically exit the menu after
10 seconds. Or, simultaneously press and hold the [+] and [–]
buttons for two seconds. A beep will confirm the menu has
been exited.
4.6 Two-way radio communication
Select the appropriate two-way radio channel using the menu.
To transmit a two-way radio message, press and hold the
Push-To-Talk (PTT) button. If VOX is activated, speak into the
microphone to transmit.
SMART TIP: Your dealer can set the time for maximum trans-
mission time.
SMART TIP: Double press on the PTT button to activate or
deactivate VOX.
To maintain noise cancelling performance, the speech micro-
phone should be positioned very close to your mouth (less
than 3 mm or 1/8 inch).
4.7 Bluetooth® wireless communication
4.7.1 Pairing a Bluetooth® device
When the headset is powered on, press the Bluetooth® button
on the left cup to enter pairing mode when no device is paired.
A voice message will confirm "Bluetooth® pairing on".
Make sure that Bluetooth® is activated on your Bluetooth®
device. Scan for devices and select "WS LiteCom Pro III
Headset". A voice message will confirm when the pairing is
complete "Pairing complete".
The headset can be paired to two Bluetooth® devices, and can
be connected to two devices at the same time.
NOTE: By default, the radio VOX functionality is disabled when
taking a phone call via a Bluetooth® connection. Once the call
has ended VOX is automatically back on. To transmit on the
two-way radio during phone call, press the PTT button. If the
PTT button is pressed during a phone call, your voice will only
transmit through the two-way radio and not to the phone call.
To activate VOX during a phone call, double press the PTT
button. Your voice will then be transmitted to both the two-way
radio and the phone call.
FP3806_LiteCom_revb.indd 6
4.7.2 Operating your Bluetooth® device via the headset
NOTE: The latest paired Bluetooth® device is the one you
operate via the headset.
Bluetooth® Action (Blue-
Scenario tooth® button
on the left cup)
If Bluetooth® Long press
device is con-
nected but no
activity
If Bluetooth®
Short press
device is
connected and
Long press
receiving an
incoming call
If Bluetooth® Short press
device is con-
nected, and has
an ongoing call
SMART TIP: You can also stream music from your Bluetooth®
device.
If Bluetooth® Short press
device is con-
Double short
nected, and
press
streaming is
ongoing Triple short press
Long press
4.8 Communicate via connected external radio
Connect your external communication radio via the auxiliary
port (cable not included). To transmit, use the PTT button on
the radio or external PTT adapter.
4.9 Communicate face to face (push-to-listen)
The surround microphones can be activated from off or low
state with a double press on On/Off/Mode button.
Press any other button to deactivate push-to-listen.
6
GB
Feature
Voice dial
Answer call
Reject call
Hang up
Play/Pause
Next track
Previous track
Voice dial
2017-06-01 14:18:43