IKEA RENLIG FWM7 Mode D'emploi page 21

Masquer les pouces Voir aussi pour RENLIG FWM7:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Warning! Switch off the appliance before you do the checks.
Problem
Possible cause
The water tap is closed.
The inlet hose is squashed or
kinked.
The filter in the inlet hose or the inlet
valve filter are blocked.
The appliance
does not fill:
The water tap is blocked or is furred
with limescale.
The connection of the water inlet
hose is not correct.
The water pressure is too low.
The door is not properly closed.
The drain hose is squashed or
kinked.
The drain filter is clogged.
The appliance
The connection of the drain hose is
does not drain
not correct.
the water:
An option or a programme that
ends with the water still in the tub or
a that eliminates all the spinning
phases has been selected.
The appliance
door is open or
not closed cor-
rectly.
The plug is not properly inserted in
the power socket.
There is no power at the socket.
The main fuse has blown.
The appliance
The programme selector dial is not
does not start:
correctly positioned and the button
5 has not been pressed.
The delay start has been selected.
The Child Lock function is activated.
Solution
Open the water tap.
Check the inlet hose connection.
Clean the water inlet filters. (See
"Cleaning the water inlet filters" for
more details).
Clean the water tap.
Check the inlet hose connection.
Contact your local water authority.
Close the door firmly.
Check the drain hose connection.
Clean the drain filter.
Check the drain hose connection.
Select the draining or spinning pro-
gramme.
Close the door firmly.
Insert the plug into the power sock-
et.
Please check your domestic electri-
cal installation.
Replace the fuse.
Please turn the selector dial and
press the button 5 again.
If the laundry are to be washed im-
mediately, cancel the delay start.
Deactivate the Child Lock function.
21

Publicité

Table des Matières
loading

Table des Matières