Part List; Discarding & Environment - Hendi 975305 Mode D'emploi

Part list

Part No. Part Name
1 front plate
2 shaft protector A
3 nut
4 blade
5 spacer
6 square mandrill
7 left stripper comb
8 hand wheel
9 back plate
10 right closing ring
11 pin
12 right shaft
13 shaft protector B
14 M5x10 screw
15 bracket
16 base plate
17 rubber foot
18 M8x20 screw
19 M10 nut
EN
20 worm
21 cp24xcp15x7 oil seal
22 motor front cover
23 6002 bearing
24 motor foot
25 motor case
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
At the end of the life of the appliance, please dis-
pose of the appliance according to the regulations
and guidelines applicable at the time.
10
Part No. Part Name
26 electric box
27 electric box cover
28 fan cover
29 cp12 C-type snap ring
30 fan
31 motor back cover
32 ripple gasket
33 6201 bearing
34 rotor
35 motor shaft
36 stator
37 switch
38 connect plate
39 s/s case
40 spindle
41 M6 nut
42 motor screw
43 gear box cover
44 6804 bearing
45 worm gear
46 spacer
47 6805 bearing
48 M5x16 screw
49 gearbox
50 output shaft
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.
Part No. Part Name
51 cp35xcp25x7 oil seal
52 reversing small gear
53 cp20 C-type snap ring
54 cp35 C-type snap ring
55 6202 bearing
56 M5x20 screw
57 M6x20 screw
58 5x5x12 flat key
59 6x6x15 flat key
60 reversing big gear shaft
61 reversing big gear
62 cp15 C-type snap ring
63 microswitch
64 s/s shield
65 connect bracket
66 20x15x3 magnet
67 magnet base
68 guide plate
69 left closing ring
70 knob
71 round mandrill
72 right stripper comb
73 lock
74 left shaft