Albrecht Audio DR 80-D Mode D'emploi page 11

5 Reset
You can reset your radio to factory settings.
Please Note: All DAB and FM stations in the station preset buttons will be erased
when performing a reset.
Hold down the DAB+/FM button for 2 seconds. The display will show: RESET
Confirm the reset by pressing Tune/Select.
RESET OK will be displayed and afterwards the radio will reset and begin to search for
DAB+ stations.
6 Troubleshooting
If you should have any problems with your radio, you can find a few quick and easy
checks below, with which you can often resolve the problem.
Bad Radio Reception
For digital DAB+ reception, you must be located in an area in which DAB+ signals can
be received. Please visit www.empfangsprognose.de for information regarding DAB+
reception in your area.
 Make sure that the antenna is extended.
 Perform a new station search, see 2.4 Station Search
 Perform a new manual station search (see 3.1.1 Manual Station Search), adjust
the antenna for best reception.
 Relocate your radio to an alternative location. Please remember to start a new
station search if you have moved with your radio (see 2.4 Station Search).
It is also possible that other electronic devices themselves are causing interference, in
case these devices (e.g., TV, computer, radio devices) are operated too close to the
radio. You should always first try a different location for your radio if you have reception
interference.
No Sound
Turn the "VOL" control dial towards the right to increase the volume.
If you operate your radio on AC power, make sure that the power adapter is connected
to the power supply input on the rear side of the radio and to the socket outlet. If
operating on battery power, make sure that your batteries are not exhausted.
22 English