Technical Data; Before Starting Up - Scheppach SG3400i Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Electrical residual risks
Electrical contact
Touching the spark plug may cause an electrical
shock.
- Never touch the spark plug while the engine is run-
ning.
Thermal residual risks
burns, chilblains
Touching of the exhaust/ case may cause burns.
- allow motor driven machines to cool.
Danger from noise
hearing damage
Prelonged unprotected work with the device may
cause hearing damage.
- Always wear ear-muffs .
Danger caused by materials and other substanc-
es
Contact, inhalation
The emissions of the machine may cause damages
to health.
- Only use the motor driven machine outdoors.
Fire, explosion
m Fuel is flammable.
- During work and refuelling smoking and open
flames are prohibited.
In case of emergency
In case of a possibly occuring accident take the nec-
essary first aid steps as appropriate and obtain quali-
fied medical aid as quickly as possible.
If you obtain aid please give the following infor-
mations:
1. Where did it happen
2. What happend
3. How many injured
4. Type of injury
5. Who is reporting!

6. Technical data

Generator
IP class
Continous power P
(S1)
nenn
(230 V) W
Maximum power P
(S2 2
max
min) (230 V) W
Rated voltage U
nenn
Rated current I
nenn
Frequency F
nenn
Drive engine design
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Digital Inverter
IP23M
2800
3400
2 x 230 V~
12 A (230 V)
50 Hz
4 stroke 1 cylinder
air colled
Displacement cm
3
Maximum power (motor) kW
/PS
Fuel
Tank capacity l
Type of motor oil
Amount of oil (approx.)
Consumption at full load l/h
Weight kg
Performance factor cos φ
Performance class
Temperature max
C
°
Max. altitude
Spark plug
Subject to technical modifications!
Operating mode S1 (continuous operation)
The machine can be continuously operated with the
quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated with the
quoted power o utput. Afterwards the machine must
be stopped for a while to prevent it from overheating.
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L
= 61 dB(A) (7 m)
pA
Sound power L
= 96 dB(A) (4 m)
wA
Uncertainty K
= 3 dB
pA
Noise
m Warning: Noise can have serious effects on
your health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.

7. Before starting up

m ATTENTION!
Always check before starting the engine:
• Check the fuel level and top it up if necessary
- the tank should be at least half filled
• Make sure that the generator has sufficient ventila-
tion
• Make sure that the ignition cable is secured to the
spark plug
• Disconnect possibly connected electronical device
from the generator
• Condition of the air filter
• Condition of the fuel lines
• The external bolt connections for tightness
• whether the battery is connected
212
3,8 / 5,1
unleaded (E5)
7,4
10W30 / 15W40
0,5 l
2,1
43,8
1
G1
40
1000 m
F7RTC / BPR6HS
GB | 23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5906217901

Table des Matières