Ac Power Cord - Teac AG-L800 Manuel Du Propriétaire

CD-R/MD, TAPE
Connect the component with RCA pin cords. Make sure to
connect :
white plug w white jack(L:left)
red plug w red jack(R:right)
DIGITAL IN/OUT terminals
Connect the component with an optical or a coaxial cable.
DIGITAL OUT w DIGITAL IN(CD-R, MD, etc.)
DIGITAL IN w DIGITAL OUT(CD-R, MD, etc.)
< Connect any one of the DIGITAL IN terminals.
< When using DIGITAL OPTICAL IN terminals, remove the caps
from the terminals. When you do not use them, leave the caps
in place.
< To record digitally, connect the recorder(CD-R, MD, etc.) to
DIGITAL OUT.
12

AC POWER CORD

Connection
ZONE-2 OUT
This additional set of video and audio jacks is primarily intended
to relay pictures and sound to a TV set in the next room.
Power cord (AC)
Be sure to connect the power cord to an AC outlet which supplies
the correct voltage.
Hold the power plug when plugging or unplugging the power
cord.
ENGLISH
MD/CD-R,