Blade Guard - Husqvarna K760 Mode D'emploi

Blade guard

WARNING! Always check that the guard
!
is correctly fitted before starting the
machine.
This guard is fitted above the cutting blade and is
designed to prevent parts of the blade or cutting
fragments from being thrown towards the user.
Checking the blade and the blade guard
• Check that the guard over the cutting blade is not
cracked or damaged in any other way. Replace when
damaged.
• Check that the cutting blade is fitted correctly and
does not show signs of damage. A damaged cutting
blade can cause personal injury.
Vibration damping system
WARNING! Overexposure to vibration
!
can lead to circulatory damage or nerve
damage in people who have impaired
circulation. Contact your doctor if you
experience symptoms of overexposure
to vibration. Such symptoms include
numbness, loss of feeling, tingling,
pricking, pain, loss of strength, changes
in skin colour or condition. These
symptoms normally appear in the
fingers, hands or wrists. These
symptoms may be increased in cold
temperatures.
• Your machine is equipped with a vibration damping
system that is designed to minimize vibration and
make operation easier.
• The machine's vibration damping system reduces the
transfer of vibration between the engine unit/cutting
equipment and the machine's handle unit. The engine
body, including the cutting equipment, is insulated
from the handles by vibration damping units.
MACHINE´S SAFETY EQUIPMENT
Checking the vibration damping system
WARNING! The engine should be
!
switched off, and the stop switch in
STOP position.
• Check the vibration damping units regularly for cracks
or deformation. Replace them if damaged.
• Check that the vibration damping element is securely
attached between the engine unit and handle unit.
Muffler
WARNING! Never use a machine without
!
a muffler, or with a faulty muffler. A
damaged muffler may substantially
increase the noise level and the fire
hazard. Keep fire fighting equipment
handy.
The muffler gets very hot during and
after use as well as when idling. Be
aware of the fire hazard, especially when
working near flammable substances and/
or vapours.
Keep fire fighting equipment handy.
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
Inspecting the muffler
Check regularly that the muffler is complete and secured
correctly.
–
English 9