Daily Servicing; Repairs And Maintenance; Declaration Of Conformity; Environmental Protection - Cleanfix TW 411 Mode D'emploi

6 Maintenance / servicing

6.1 Daily servicing:

Drain the fresh watertank. Fill with approx. 6l of fresh
☞
water. Hold the nozzle over a réceptacle and flush the
pressure pump, hose and spray nozzles thoroughly.
Clean float and fresh water filter (on tank base). Drain
fresh water tank completely.
Drain waste water tank completely and thoroughly
☞
wash out with clean water.
Wipe machine dry inside and out.
☞

6.2 Repairs and maintenance:

The motors and pressure pump are maintenance-free.
☞
We recommend our Service for repairs and
☞
inspections.
Protect machine and accessories from frost.
☞
7 Faults
7.1 Possible causes of insufficient spraying
capacity:
Spray nozzles blocked
☞
Fresh water filter dirty
☞
Fresh water tank empty
☞
Pressure pump not switched on
☞
7.2 Possible causes of low suction capacity:
Transparent dome not correctly mounted to waste
☞
water tank aperture (air entering)
Suction slot on nozzle blocked
☞
Suction hose not correctly connected to handpipe
☞
Waste water tank full (float at top is interrupting
☞
suction)
Riser tube mesh blocked
☞
8. Final remark
Subject to changes within the framework of technical
progress!!

Environmental protection

The packaging material can be recycled.
Please do not throw the packaging
material into household waste; please
send it for recycling.
Old appliances contain valuable materi-
als that can be recy-cled; these should
be sent for recycling.. Batteries, oil, and
similar substances must not enter the
environment. Please dispose of your old
appliances using appropriate collection
systems.

Declaration of Conformity

We,
Cleanfix Reinigungssysteme AG
Stettenstrasse - CH-9247 Henau
declare under our sole responsibility that the product,
Water suction cleaning appliane
TW 411 / TW 412
from serial code No. 9001 and following
(name,type, serial number)
to which this declaration relates is in
conformity with the following stand- ard(s) or other
normative document(s).
Sefety:
EN 60335-1 (ed.4) ; am 1; am 2;
EN 60335-2-68 (ed.3) ; am1; am 2
EMC:
CISPR 14-1 (ed.5) ; am1
CISPR 14-2 (ed.1) ; am1; am 2
EN 61000-3-2 (ed.3) ; am1; am 2
EN 61000-3-3 (ed.2)
EMF:
IEC 62233 (ed.1)
( title and/or number and date of issue of the standard(s) ).
following the provisions of Directive
2006 / 95 / EC - 2004 / 108 / EC - 2006 / 42 / EC
Henau, 01.01.2010
Roland Flück
English 9