Cleaning; Accessories; Storage - SilverCrest SUR 46 B1 Mode D'emploi

__GRA100117_B2.book Seite 38 Montag, 2. Juni 2014 9:47 09
6. Press the button SET|8 repeatedly until
the requested cleaning period appears
on the display (180, 300, 480, 600,
090 seconds) - depending on the de-
gree of staining.
090 seconds: recommended for minor
staining and objects such as eyeglasses
180 seconds: standard time for normal
staining
300 seconds: recommended for the ini-
tial cleaning with the ultrasonic cleaner
480 seconds: recommended for the ini-
tial cleaning if several objects are
cleaned simultaneously
600 seconds: recommended for severe
staining.
7. Press the button START|9 to start the
cleaning process. The power LED|3 is
lit blue and the seconds are counted
down on the display. During the clean-
ing process, a buzzing / humming can
be heard.
8. After the requested cleaning period has
elapsed, the power LED|3 goes off and
the display shows 000. By pressing the
button STOP|7, you are able to inter-
rupt the cleaning process earlier at any
time.
Press ...
... the button START|9, to continue
with the cleaning process for the re-
maining cleaning period.
... the button SET|8, to set the request-
ed cleaning period and start the
cleaning process by pressing the
button START|9.
9. The device is switched off when the
mains plug is disconnected. The dis-
play goes off.
10. Open the lid|4 and remove the
cleaned objects.
11. Dry the cleaned objects with a soft
cloth and repolish shiny surfaces, if
necessary.
12. Drain the cleaning fluid.
38 GB
NOTE: if necessary after the cleaning pro-
cess, change the cleaning fluid to achieve a
more thorough clean.

7. Cleaning

DANGER of electric shock!
Pull the mains plug out of the wall socket
before you clean the device.
WARNING! Risk of material
damage!
Do not use any astringent or abrasive clean-
ing agents.
Ultrasonic device
• Drain the cleaning fluid after each clean-
ing process.
• In order to prevent lime residues and
soiled rims, wipe the stainless steel tank
and the outer surface of the device with
a soft, slightly damp cloth.

Accessories

• Clean the insets with a soft, slightly
damp cloth.

8. Storage

DANGER for children!
Keep the ultrasonic cleaner out of
the reach of children.
• Allow the device to cool down before
you put it away.
• Clean and dry all parts, before putting
the device away.