Running The Descaling Program - Beko CEG7425B Manuel D'utilisation

6 Cleaning and maintenance
– The cleaning program is
complete when the "Cleaning
program" function display
goes out.
10. Remove the drip tray and
empty it.
11. Press the drip tray back onto
the appliance until it audibly
engages.
12. Remove the water tank, fill it
with clean water and push it
back in.
– The appliance is now ready
for operation again in the last
selected coffee mode status.
6.10 Running the
descaling program
The descaling program enables
simple and effective descaling of
your coffee machine. You should
descale the appliance at regular
intervals, but at the latest when
the following indication is flashing
on the display:
Fully Automatic Coffee Maker / User Manual
The descaling process
runs in 2 phases, takes
C
approx. 10 minutes
and should not be
interrupted.
In case of power
C
failure during the
descaling program, it
has to be restarted.
The frequency of
descaling
on the hardness of
the water in your
region.
please do not forget to
C
determine the water
hardness and to set
the
hardness
coffee
Please
sections 5.5 and 5.7 for
instructions on this.
depends
Therefore
corresponding
for the
machine!
refer to
59 / 233 EN