Installing The Coffee; Dispensing Unit - Beko CEG7425B Manuel D'utilisation

6 Cleaning and maintenance
5. Push the hoses onto the
connecting piece B and the
sleeves into the hoses A. Insert
the hose with the spring push
the hose and spring auf onto the
connector C.
A
B B
A
C
D
The
be
over the half of the
C
hose and the funnel
shaped end of the
hose D must face
upwards.
Fully Automatic Coffee Maker / User Manual
A
C
spring must
evenly pulled
6. Now insert both sleeve ends
(with the hoses) into the
dispensing tubes 2 and press
them in until they snap in
properly. Push the connecting
piece into the fixing slot 1 and
subsequently push the hoses
to the right and left under the
frame 3.
3
6.7 Installing the
coffee dispensing
unit
1. Place the coffee dispensing
unit in the upper position back
into the door and push the unit
slightly 1 so that it audibly snaps
in once.
1
3
2
53 / 233 EN